Deleting the Pairing Information
There are two ways to delete pairing information registered to number keys [1] to [4] in HHKB Studio.
Deleting pairing information separately
-
Hold down the [Fn] key and press the [Q] key.
The keyboard enters pairing standby mode and the LED indicator lights light up one after the other, from side to side.
HINTTo exit the pairing standby mode, press the [Fn] + [X] keys.
-
Hold down the [Fn] key and press the [Control] key, then hold down the [Delete] key and press the number key (any of [1] to [4]) to which the pairing information that you want to delete is registered.
When the deletion of pairing information is complete, the LED indicator turns off and the keyboard is disconnected.
To reconnect the keyboard, press the [Return] key.
-
For Windows, delete [HHKB-Studio<n> (*1)] from the Bluetooth devices on the OS.
*1: The number of the number key (1 to 4) to which the pairing information is registered is displayed in place of "<n>".
-
Deleting all pairing information at one time
-
Hold down the [Fn] key and press the [Q] key.
The keyboard enters pairing standby mode and the LED indicator lights light up one after the other, from side to side.
HINTTo exit the pairing standby mode, press the [Fn] + [X] keys.
-
Hold down the [Fn] key and press the [Z] key and then press the [Delete] key (*1).
*1: If the keyboard setting is one of the following cases, press the [` ~] key located just above the [Delete] key instead of pressing the [Delete] key.
When the profile for macOS (Profile2 as the factory default) is used
When SW5 of the DIP switches is Up (ON) (to change Delete → BS)
When the deletion of pairing information is complete, the LED indicator turns off and the keyboard is disconnected.
To reconnect the keyboard, press the [Return] key.
-
For Windows, delete [HHKB-Studio<n> (*1)] from the Bluetooth devices on the OS.
*1: The number of the number key (1 to 4) to which the pairing information is registered is displayed in place of "<n>".